Sharp ER-A450T Programming Manual

A, B: Not used (Fixed at "00")
C: No sale in REG mode C
Enable 0
Disable 1
D: Finalization in REG mode when
SBTL is zero
D
Enable 0
Disable 1
E: Printing of item in PBLU transaction
on SLIP
E
Yes 0
No 1
F, G, H: Not used (Fixed at "000")
X: 8 MRS = 00000000
A, B, C, D: Not used (Fixed at "0000")
E: Validation of check cashing (SLIP ONLY) E
Non compulsory 0
Compulsory 1
F: Validation of RA (SLIP ONLY) F
Non compulsory 0
Compulsory 1
G: Validation of PO (SLIP ONLY) G
Non compulsory 0
Compulsory 1
H: Not used (Fixed at "0")
X: 9 MRS = 00000000
A, B: Not used (Fixed at "00")
C: BIRTHDAY print on printer C
Yes 0
No 1
D, E, F, G, : Not used (Fixed at "0000")
H: Footer Graphic logo printing at the
end of receipt
H
No 0
Yes 1
XX:10 MRS = 00000000
A,B: Not used (Fixed at "00")
C: Learning function UPC entry C
Yes 0
No 1
D, E, F, G, H: Not used (Fixed at "00000")
X: 11 NOT USED MRS = 00000000
XX:12 MRS = 00000000
A, B, C, D, E, F, G: Not used (Fixed at "0000000")
H: Price change function in REG mode H
Enable 0
Disable 1
XX:13 MRS = 00000000
A,B,C: Not used (Fixed at "000")
D: Printing of price shift text on the
Receipt/Journal
D
Yes 0
No 1
E: Not used (Fixed at "0")
F: Treating EAN8 code 200 as PLU F
Yes 0
No 1
G: Not used (Fixed at "0")
H: Price entry after ISBN or ISSN H
Compulsory 0
Inhibited 1
[JOB#2617]
PROGRAMMING THE TIME INTERVAL FOR THE TILL TIMER
XXX: 0 - 255 sec
MRS = 000
[JOB#2618]
SCALE TABLE PROGRAMMING
X: Table No. = 1 - 9
YYYY: Weight = 0 - 99.99 ( Enter without decimal point.)
MRS = 0
[JOB#2619]
HOURLY REPORT (Starting time)
a: Memory type A
30 minutes (24 hour) 0
60 minutes (24 hour) 1
bb: Starting time (hour): 00 - 23
ex)
Case 1.
X1 Hourly report (#160) (30 min, start time = 7]
2617 @/FOR CA/ATXXX
0
YYYY
0
2618 X
UPC code
CA/ATSBTL
@/FOR
@/FOR
2619 @/FOR CA/ATabb
0
2619 @/FOR CA/AT 007

Sharp ER-A450T Specifications

General

Brand	Sharp
Model	ER-A450T
Category	Cash Register
Language	English