4. Service mode programming
The following is the key sequence required for programming.
Details of [A][B][C][D] will be discussed at each item description.
★ mark is MRS setting.
[JOB #901]:MRS=0002 [For "U" version]
#901-A, B: Not used (Fixed at "00")
#901-C: 1. Rounding system
1. Rounding system 901-C
Normal 0 ★
SINGAPORE 8
#901-D: 1. TAB setting
1. TAB setting 901-D
0 0
0.0 1
0.00 2 ★
0.000 3
[JOB #901]: MRS=0002 [For "A" version]
#901-A: Not used (Fixed at "0")
#901-B: 1. Tax system
1. Tax system 901-B
Auto tax 1-4 & manual tax 0 ★
CANADIAN TAX 6
#901-C: 1. Rounding system
1. Rounding system 901-C
Normal 0 ★
SINGAPORE 8
#901-D: 1. TAB setting
1. TAB setting 901-D
0 0
0.0 1
0.00 2 ★
0.000 3
[JOB#902] NOT USED MRS=0000
[JOB#903] MRS=4000
#903-A: 1. ECR data copy baud rate
1. Baud rate (bps) 903-A
2400 2
4800 3
9600 4 ★
19200 5
38400 6
The communication speed with the ER-02FD is 19200
bps max.
#903-B, C: Not used (Fixed at "00")
#903-D: 1. Type of food stamp system
1. Type of food stamp system 903-D
★
No food stamp 0
Tax not payable in food stamps 1
Tax payable in food stamps 2
Food stamp tax forgiveness 3
[JOB#904] MRS=0000
#904-A: 1. Printing of date
1. Printing of date 904-A
★
Yes 0
No 4
#904-B: 1. Printing of consecutive No.
1. Printing of consecutive No. 904-B
★
Yes 0
No 4
#904-C, D: Not used (Fixed at "00")
[JOB#905] MRS=0005 [For "U" version]
#905-A: 1. Taxable 4 subtotal print on X/Z report.
2. Gross Tax 4 and refund Tax 4 total print on X/Z report.
3. Net Tax 4 total print on X/Z report.
1. Taxable 4
SBTL
2. Gross Tax 4
and refund
Tax 4
3. Net Tax 4
905-A
Print
Print
Print 0 ★
Skip 1
Skip
Print 2
Skip 3
Skip
Print
Print 4
Skip 5
Skip
Print 6
Skip 7
#905-B: 1. Tax printing when taxable subtotal is zero.
2. Tax printing when tax is zero.
1. Taxable subtotal is
zero
2. Tax is zero
905-B
Skip
Print 0 ★
Skip 1
Print
Print 4
Skip 5
#905-C, D: Not used (Fixed at "05")
XXX
CA/AT
(Job#)
[A] [B] [C] [D]
Numeric entry
4 digits max
0
@/FOR
To Next Page
Loading...
Need help?
General
