[JOB#2615]
SLIP PRINTER OPTIONS
Programming of the limits to No. of times of validation printing.
VV: Initial slip feed line = 0 - 64
XX: Slip print max. line No. = 0 - 99
Y: No. of times of validation printing = 0 - 9
X: Not used (Fixed at "0")
MRS = 009910
Note: Max. line number of the slip must be set to a value less than
the length of the of bill included the initial feed line.
[JOB#2616]
OPTIONAL FEATURE
XX: 1 MRS = 00000000
A: OP X/Z report A
Enable 0
Disable 1
B: PO operation in REG mode B
Enable 0
Disable 1
C: Refund type of sale function in REG
mode
C
Enable 0
Disable 1
D: "RFND" key entry in REG mode D
Enable 0
Disable 1
E: Direct void function in REG mode E
Enable 0
Disable 1
F: In direct void in REG mode F
Enable 0
Disable 1
G: Subtotal void in REG mode G
Enable 0
Disable 1
H: Refund VP (SLIP only) H
Non compulsory 0
Compulsory 1
XX: 2 MRS = 00000000
A: The first last item void A
Enable 0
Disable 1
B, C: Not used (Fixed at "00")
D: Printing of the number of purchases D
No 0
Yes 1
E: Time print E
Yes 0
No 1
F: Printing of journal F
Full print 0
Journal select 1
G: Item VP (SLIP only) G
Enable 0
Disable 1
H: (–) VP (SLIP only) H
Non compulsory 0
Compulsory 1
XX: 3 MRS = 00000000
A: Zero skip in UPC report A
Yes 0
No 1
B : Not used (Fixed at "0")
C: Zero skip in Cashier report C
Yes 0
No 1
D: Zero skip in Transaction report D
Yes 0
No 1
E: Zero skip in Dept. report E
Yes 0
No 1
F: Zero skip in PLU report F
Yes 0
No 1
G: Zero skip in Hourly report G
Yes 0
No 1
H: Zero skip in Daily net report H
Yes 0
No 1
XX: 4 NOT USED MRS = 00000000
XX:5 MRS = 00000000
A,B,C,D,E: Not used (Fixed at "00000")
F: UPC price shift system F
MGR & REG 0
MGR 1
G: UPC price shift system G
Auto 0
Manual 1
H: Return timing at "Auto" (XX:5-G = 0) H
By one item 0
By one receipt 1
X: 6 NOT USED MRS = 00000000
X: 7 MRS = 00000000
2615
@/FOR CA/AT
0
WXXYZ
@/FOR @/FOR
SBTL
CA/AT
XX
No change
ABCDEFGH
2616
To Next Page
Loading...
Need help?
General
