Sharp ER-A450T - UPC Association to Departments; Programming Rate for % Key; Programming for % Key; Programming for Media Keys and Function Keys

If the [UPC] key is depressed, the programming mode is
changed from the "PRICE PROGRAMMING" to "ATTRIBUTE
PROGRAMMING" and then changed to the "UPC ASSOCIA-
TION PROGRAMMING" by depressing the same key again.
Either "Double depression of the [UPC] key" or "a depression of
[UPC] key after scanning" is necessary for the first entry.
10) UPC ASSOCIATION TO DEPARTMENTS
Mode : PGM1/PGM2
XXXXXXXXXXXXX: UPC code
YY: DEPT. code = 1 to 50
If the record of the entered UPC code is not in the UPC file at this
programming step, the UPC code will be created.
MRS = nothing ( Default = 01)
The default value is set when the new UPC record is created by
another programming JOB.
If the [UPC] key is depressed, the programming mode is
changed from the "PRICE PROGRAMMING" to "ATTRIBUTE
PROGRAMMING" and then changed to the "UPC ASSOCIA-
TION PROGRAMMING" by depressing the same key again.
"Triple depression of the [UPC] key" or "Double depression of
the [UPC] key after scanning" is necessary for the first entry.
11) PROGRAMMING RATE FOR %KEY.
Mode : PGM1 / PGM2
XXX.XX: 0.00 to 100.00
MRS = 0.00%
If the same [%n] key is depressed, the programming mode is
changed from the "RATE PROGRAMMING" to "FUNCTION PRO-
GRAMMING".
12) PROGRAMMING FOR %KEY.
Mode : PGM2
A: Sign A
+0
–1
B: Food stamp B
Non-food stampable 0
Food stampable 1
C: Taxable4 C
Non taxable 0
Taxable 1
D: Taxable3 D
Non taxable 0
Taxable 1
E: Taxable2 E
Non taxable 0
Taxable 1
F: Taxable1 F
Non taxable 0
Taxable 1
MRS = 100000
If the same [%n] key is depressed, the programming mode is
changed from the "RATE PROGRAMMING" to "FUNCTION PRO-
GRAMMING" (from "FUNCTION PROGRAMMING" to "PRICE
PROGRAMMING").
13) PROGRAMMING RATE FOR CONVERSION KEY
Mode : PGM1 / PGM2
XXXX.XXXX: 0.0000 to 9999.9999
MRS = 0.00000
14) PROGRAMMING FOR MEDIA KEYS &
FUNCTION KEYS.
Mode : PGM2
A: Mantissa (0 to 9)
B: Exponent (0 to 8)
MRS = 18 digits. (RA, PO, CASH2, CHn, CHKn)
17 digits. (TAX)
In case of the Manual TAX HALO programming:
At the first entry, the [TAX]-key must be pushed two times.
After entry of the [@/FOR]-key, the [TAX]-key is only required
one time after.
XXXXXXXXXXXXX UPC
(Scanning)
UPC delete
DEPTn
DEPT#
VOID
Not changed
YY
CA/AT
SBTL
UPC code
Not changed
SBTL CA/AT%n XXX.XX
Not changed
ABCDEF
%n %n
CA/AT@/FOR
CNV1
Not changed
XXX.XXX
CNV2
CNV3
CA/AT
SBTL
RA
PO
CASH2
CHn
CHKn
TAX
AB
CA/AT@/FOR
TAX TAX