Sharp FP-J80Y Guide Book

EN-12
HOW TO CHANGE VARIOUS SETTINGS
Confi rmation of MAC
address
AP(Access Point) mode
Display wireless LAN
network status
1.
Select at the step on page 10.
2.
Press "HAZE" button to display MAC
address.
♪
♪♪♪♪♪♪♪
♪
〜
3.
Complete
♪
1.
Select at the step on page 10.
2.
After displaying for a while,
network statuus of Wireless LAN
adapter will be displayed.
3.
Complete
♪
For example :
In case MAC address is
"123456ABCDEF"
Connection is stable
Wireless LAN adapter is disabled
⇨
Please enable Wireless LAN adapter.
Router is not registered
⇨
Please perform the Wireless LAN
connection with the router.
Link settings with the application is not performed
⇨
Please perform the link setting with the
smartphone.
Wireless LAN adapteer network error
⇨
Please disable the Wireless LAN adapter
and enable again after a while.
Network error between the air-purifier and the router
⇨
Please confirm the network status of the
router.
Network service error
⇨
Please turn off the air-purifier and confirm
the internet status, then try again
1.
Select at the step on page 10.
2.
Please perform Wireless LAN
connection of the air-purifi er and the
router based on page 6-7.
3.
Once connected, please do
"CONNECTION BETWEEN THE AIR
PURIFIER AND SMARTPHONE" on
page 8.
※
FP-J80TA
CLEAN
ION
SHOWER
FP-J80Y
ANTI
DUST
※
Name of the button differs depending on
the model.

Sharp FP-J80Y Specifications

General

Brand	Sharp
Model	FP-J80Y
Category	Air Cleaner
Language	English