The unit is set to the optimum performance at the time of shipment from the factory.
If any value should become improper or any adjustment is necessary due to the part replacement, make an adjust-
ment according to the following procedure.
1.1. Procure the following units in order to replace the main unit:
MAIN UNIT DUNTKF915WExx
NOTE: [Caution when replacing ICs in the main unit (IC0503)]
Before replacing the relevant part, procure the following parts in which the data have been rewritten.
Ref. Description Parts code IC + data Description new IC code for service
IC0503 PC EDID RH-IXD456WJZZY VHIR24002AS-1YANDDATALC4xLE73x_PC_EDID
2. Entering and exiting the adjustment process mode. Standard method.
1. By key-unit.
1. Unplug the AC power cord, plug the AC power cord and wait until pyramid led blue is iluminated and then.
2.Pressandhold“V-”and“b” keys, simultaneously.
3.“K”appearsonthescreen.
4.Pressandhold“V-”and“P-”keys,simultaneously.
5.“SHARPFACTORYMENU”appears(seeFigure1).
6.UnplugtheACpowercordtoexitofadjustmentsprocess.
2. By own R/C
1. Turn on the TV set.
2.Press“9”,”9”,”9”,“2”,“2”,“2”(toenterthiscodethetimeislimitedto5sec.approx.)
3.“SHARPFACTORYMENU”appears(seeFigure1).
4.Press“OK”onlines5~11togotosubmenu.
5.Press“END”toreturntomainmenu.
6.Press“MENU”toexitofadjustmentsmode.
To Next Page
Loading...
Need help?
General