Caution: When the factory settings have been made, all user setting data, including the channel
settings, are initialized.
The adjustments done in the adjustment process mode are not initialized.) Keep this in mind
when initializing these settings.
1. Enter in Service mode.
2. Press “▼” or “▲” key until selecting INIT.
3. Press OK key.
4. INIT menu appears and “Factory init” option is selected.
5. Press “►” and select the option desired (EURO/RUSSIA/NORDIC/UK/EAST EUROPE).
6. Press OK key and initialization starts.
7. WEST EURO OK message appears for EURO option when the setting is complete.
RUSSIA OK message appears for RUSSIA option when the setting is complete.
NORDIC OK message appears for NORDIC option when the setting is complete.
UK OK message appears for UK option when the setting is complete.
EAST EUROPE OK message appears for EAST EUROPE option when the setting is complete.
Note: Never turn the power off during initialization.
TV restarts in “Initial Installation” menu
The following settings will be back to their factory ones.
• User settings
• Channel data (e.g. broadcast frequencies)
• Maker option setting
• Password data
To Next Page
Loading...
Need help?
General