Sharp LC-40LE730E Service Manual

33
LC-40LE730
LC-46LE730
10.INPUTMODEFIXED[VARIABLE→FIXED]
“FIXED”hasbeenselected,anychannelsandinputmodesotherthanthoseselectedatthestartmodecannot
be picked up.
11. INPUT TV MODE PROGRAM NUMBER [1-999]
Whenanyotheritemthan“NORMAL”,i.e.number,hasbeenselected,and“INPUTMODESTART”optionis
setto“TV”,thesetswillstartintheselectedservice/programnumberatthenextpower-on.
12. RC PATH THROUGH [ON ↔ OFF]
When ON and RS-232 circuitry is really assembled , in pin #9 of RS-232 socket appears a feedback of
the remote signal (3.3v logic type).
13. HOTEL MODE [ON ↔ OFF]
If ON has been selected the HOTEL MODE is activated.
14. RESET
Cancel all Public Mode settings. (It returns to the factory settings)
15. COMMIT
Press OK to select this item, or press cursor RIGHT / LEFT keys on the remote control to apply the change.
 If“YES”isselectedthechangewillbestoredandtheTVsetwillbereset.
9. SMART LOADER
Description.
The Smartloader is a function implemented in the service software of SEES designed L730 series intended to easily
replicate the user settings of one TV into another. These settings include (but not restricted to): picture and audio, tun-
ing set-up, language and country selection, PIN, child locked programs… Factory adjustments are not copied as they
are different for every TV.
The Smartloader makes possible the user data to be stored in a memory device connected to the USB terminal of the
TV that is used as reference and later load those data into other TVs by using their respective USB terminal.
How it works.
In reference TV:
1. Insert a memory device in the USB slot.
2. Enter in service mode, select Factory Menu and SMARTLOADER option.
3.Select“SavesettingstoUSB”andpresstheRIGHTcursorintheremotecontrol.
4.Waituntil“OK”isdisplayed,thelehasbeensuccessfullycreatedintherootdirectoryofthememorydevice.
Incaseoferror,anexplanationmessageisshown.
In TV to be cloned:
1.Insertamemorydevicewithaleinitobtainedfollowingtheaboveprocedure.
2. Enter in service mode, select Factory Menu and SMARTLOADER option.
3.Select“LoadsettingsfromUSB”andpresstheRIGHTbuttonintheremotecontrol.
4.Aftersomeseconds,“OK,rebootTVset”isdisplayed.Incaseoferror,anexplanationmessageisshown.
5. As indicated, reboot the TV to load the new settings.
Very important: All the TVs must have the same software version and hardware.
8. Public Mode (Hotel mode) ( continued )

Sharp LC-40LE730E Specifications

General

Brand	Sharp
Model	LC-40LE730E
Category	LCD TV
Language	English