Direct Button Operation
MUTE
Changing
Channels
Changing
Volume
The surround function produces Surround effect from
the speakers. Each time you press
SURROUND, the
mode changes.
• Press SURROUND to toggle between Mono, Stereo, and
Virtual
surround
modes.
ID
• You can have the same settings by choosing "Surround" on
the menu items. (See page 19.)
AVMODE
Allows you
to
capture and freeze a moving image that
you are watching.
Press FREEZE.
• A moving image is captured.
• Press
FREEZE again
to
cancel the function.
ID
• If you are using the freeze function and a broadcast
activates the V-CHIP BLOCK, the freeze function will
be
canceled and a V-CHIP BLOCK message will appear.
FREEZE
Press FLASHBACK
to
switch
to
the previously tuned
channel.
• Press FLASHBACK again to switch back to the currently
tuned channel.
SURROUND
FLASHBACK
INPUT
To view external source images, select the input source
using
INPUT
on
the remote control unit or
on
the
TV.
1 Press INPUT.
• A list of selectable sources appears.
2 Press INPUT again
or
press
..
/~
to
select the
input source.
• An image from the selected source automatically displays.
• Each time
INPUT
is
pressed, the input source toggles.
ID
• See page 12 for extemal equipment connection.
You can change the volume by pressing
VOL
+/- on the
1V
or on the remote control
unit.
·To
increase the volume, press
VOL+.
• To decrease the voiume, press VOL - .
--@)
Mutes the current sound output.
Press
MUTE.
ID
• Mute can
be
canceled by using the method below.
- Mute will be canceled if you press
VOL+/-
or
MUTE.
~
w.
ii
···1
•••
···1
•••
You can change channels by pressing
CHNV
or
0-9,
• (DOl).
Examples:
To
select a 1
or
2-digit channel number
(e.
g., Channel
5):
Press 5
~
ENT.
To select a 3-digit channel number
(e.
g., Channel
115):
Press 1
~
1
~
5~
ENT.
To select a 4-digit channel number
(e.
g., Channel
22.1):
Press 2
~
2
~
• (DOT)
~
1
~ENT.
ID
• When selecting a 1-digit channel number, it is not
necessary
to
press 0 before the number.
Sleep
Timer
Allows you
to
set a time when the
1V
automatically
switches
to
standby.
Press SLEEP.
• The remaining time displays when the sleep timer has been
set.
• Each time you press
SLEEP, the remaining time switches
as shown below.
0
...
5
...
10
...
15
•••
...
170
...
175
...
180
Off
•
• When set, the time automatically starts counting down.
• If you want
to
adjust the sleep timer, you can press SLEEP
twice then change the time setting.
• One minute before the time expires, the remaining time
displays every second.
ID
• Select
"0"
by
pressing SLEEP
to
cancel the sleep timer.
•
The
1V
will
enter standby
mode
(power indicator
lights
red)
when
the
remaining
time
reaches
zero.
AV MODE gives you 5 viewing options to choose from
to
best match the surrounding environment of the 1V,
which can vary due
to
factors like room brightness,
type of program watched or the type
of
image input
from external equipment.
Press
AV
MODE. Current AV MODE displays.
• Press AV MODE again before the
mode
displayed
on
the
screen disappears. The mode changes as shown below:
USER: Allows the user
to
customized settings as desired.
You can set the
mode
for each input source.
DYMAMIC: Changes the image and sound settings
to
the factory preset values.
STANDARD: For normal
TV
viewing.
MOVIE: Brilliant picture settings for a cinematic
experience.
GAME: Lowers image brightness for easier viewing.
@-14