LC-52XS1E/RU/LC-65XS1E/RU
3 – 3
[3] Monitor adjustment process mode menu
The character string in brackets [***] appear as a page title in the adjustment process menu header.
Page Line Item Description Remarks (adjustment detail, etc.)
1/46 [INFO]
1 MONITOR MAIN Version 1.10(W2008/09/03 1) Monitor Main software version
2 MONITOR BOOT Version 1.01 Monitor BOOT Version.
3 MONITOR SUB Version 1.05 Monitor sub software version
4 FRC Version 71716531 FRC Version
5 LED A/MAIN/SUB version 0808236501/1.0.0/1.0.0 A3C,LEDTCON software, LEDTCON FPGA Version
6 CPLD/FPGA Version a3 / 46 CPLD/FPGA Version.
7 EQ DATA CHECKSUM ROM Audio data checksum.
8 LAMP ERROR 0 Number of termination due to lamp error.
9 MONITOR SUB ERR CAUSE 00 00 00 00 Monitor error standby cause.
10 NORMAL STANDBY CAUSE 0 Situation that became standby at the end.
(Excluding the error)
11 ERROR STANDBY CAUSE 1) 0 0H 0M Error standby cause Total operating time before error.
2) 0 0H 0M (5 times history)
3) 0 0H 0M
4) 0 0H 0M
5) 0 0H 0M
2/46 [INIT]
1 INDUSTRY INIT OFF Initialization to factory settings execution.
2 INDUSTRY INIT(-Hotel) OFF Initialization to factory settings execution.
(Hotel mode is excluded)
3 HOTEL MODE OFF Hotel mode ON/OFF setting
4 Center Acutime **H **M Main integrated operating time (reset by the factory setting)
5 RESET OFF Main integrated operating time reset.
6 Backlight Acutime **H **M Backlight accumulative operating time (not reset by factory setting)
7 RESET OFF Backlight accumulative operating times reset.
8 LAMP ERROR RESET OFF The number of times which carried out power supply OFF in the
lamp error is set to 0.
9 VIC XPOS 0 Disclosure
10 VIC YPOS 0 Disclosure
11 VIC BUFFER CAPTURE Disclosure
12 VIC SIGNAL TYPE MAIN Disclosure
13 VIC READ OFF Disclosure
3/46 [PANELADJ]
1 VCOM ADJ 45 Common bias adjustment
2 LCD LUMA ADJ NOT SUPPORT Upper and lower brightness difference adjustment
3 HDMI EDID WRITE Enter Execute HDMI EDID Data write
4 HDMI CEC TEST Enter Disclosure
5 INSPECT USB TERM Enter Disclosure
6 IRSS TEST Enter Disclosure
7 FDFB ADJ OFF Disclosure
8 LED TCON OPEN ERROR 0 Disclosure
9 MAIN TEMPERATURE 67 Disclosure
10 MONIDATA READ[TEMP/OPC] OFF Disclosure
11 GAMMA PATTERN MODE LCD ADJ Disclosure
4/46 [FR DDRTEST]
1 DDRA TEST1 Enter Execute DDRA test 1
2 DDRA TEST2 Enter Execute DDRA test 2
3 DDRB TEST1 Enter Execute DDRA test 1
4 DDRB TEST2 Enter Execute DDRA test 2
5 DDRB TEST3 Enter Execute DDRA test 3
6 FRC ON/OFF Enter Execute FRC ON/OFF
7 FRA DDRA BIST Enter Execute FRA DDRA BIST
8 FRA DDRB BIST Enter Execute FRA DDRB BIST
9 POSTFILTER ON/OFF ON Execute POSTFILTER ON/OFF
To Next Page
Loading...
Need help?
General