4-14
FACSIMILE
Contents
FAX TRANSMISSION SEQUENCE
This section explains the basic procedure for sending a fax.
Place the original.
Place the original in the document feeder tray of the automatic
document feeder, or on the document glass.
Enter the destination fax number
• [Address Book] key: Select a destination that is stored in
the address book or look up a
destination in a global address book.
☞
RETRIEVING A FAX NUMBER FROM
THE ADDRESS BOOK (page 4-17)
• key: Use a search number to specify a destination
stored in the address book.
☞ USING A SEARCH NUMBER TO RETRIEVE
A DESTINATION (page 4-20)
• [Resend] key: Select a fax number from the last eight
destinations used for transmission.
☞
USING THE RESEND FUNCTION (page 4-23)
• Numeric keys: Enter a fax number.
☞ ENTERING A FAX NUMBER WITH THE
NUMERIC KEYS (page 4-16)
Select image settings.
Touch the [Job Detail Settings] key to select settings for the
original to be faxed.
• [Exposure] key:
Use this key to adjust the exposure of the image.
☞
CHANGING THE EXPOSURE (page 4-50)
• [Resolution] key: Use this key to adjust the resolution of the
image.
☞
CHANGING THE RESOLUTION (page 4-51)
• [Original] key:
Use this key to select the original size, the
original send size, and 2-sided original scanning.
☞ SPECIFYING THE SCAN SIZE AND
SEND SIZE (Enlarge/Reduce) (page
4-46), AUTOMATICALLY SCANNING
BOTH SIDES OF AN ORIGINAL
(2-Sided Original) (page 4-45)
To Next Page
Loading...
