7-10
SYSTEM SETTINGS
Contents
Device Count
This is used to display or print the counts of the peripheral devices installed on the machine.
1
Touch the [Total Count] key.
2
Touch the [Device Count] key.
3
Check the device counts.
To print the counts, touch the [Print] key. A message screen
appears and printing begins.
• Document feeder
Each sheet is counted as two pages when two-sided scanning is performed.
• Stapler (when a finisher is installed)
Two-position stapling and pamphlet stapling are counted as "2".
To cancel printing...
Touch the [Cancel] key in the message screen that appears after you touch the [Print] key.
System Settings
ExitAdmin Password
List Print
(User)
Fax Data
Receive/Forward
USB-Device Check
Default Settings
Total Count
Paper Tray
Settings
Printer Condition
Settings
Address Control
Document Filing
Control
System Settings
Total Count
Job Count Device Count
OK
System Settings
Device Count
Document Feeder
Duplex
Stapler
:19,496,400
: 6,256,123
: 511,923
OKPrint
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
