Sharp MX-2301N

7-153
SYSTEM SETTINGS
Contents
System Settings for Fax (Administrator) List
When the system settings are accessed with administrator rights, the following items appear. The factory default setting
for each item is also shown.
Image Send Settings
Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings.
Item Factory default setting Page
■ Image Send Settings
7-155
● Fax Settings 7-155
X Fax Default Settings 7-155
 Dial Mode Setting* Tone 7-155
 Auto Wake Up Print Enable 7-155
 Pause Time Setting 2 sec. 7-155
 Fax Dest. Confirmation Mode Disable 7-155
 Speaker Settings
7-155
• Speaker Volume: 5
• Ringer Volume Volume: 5
• Line Monitor Varies depending on country and region
• Fax Receive Complete Signal Volume: 5; Tone Pattern: 3
Transmission Complete Sound Time Setting: 3 sec.
• Fax Send Complete Signal Volume: 5; Tone Pattern: 3
Transmission Complete Sound Time Setting: 3 sec.
• Fax Communication Error Signal Volume: 5; Tone Pattern: 3
Transmission Complete Sound Time Setting:
Every 0.3 seconds
 Remote Reception Number Setting 5 7-156
 Original Print on Transaction Report Print Out Error Report Only 7-156
 Transaction Report Print Select Setting
7-156
• Single Sending Print Out Error Report Only
• Broadcasting Print Out All Report
• Receiving No Printed Report
• Confidential Reception Print Out Notice Page
 Activity Report Print Select Setting
7-156• Auto Print at Memory Full Disable
• Print Daily at Designated Time Disable
 ECM Enable 7-157
Downloaded From ManualsPrinter.com Manuals