4-102
FACSIMILE
Contents
POLLING RECEPTION USING F-CODES
This function enables your machine to call another machine and initiate reception of a fax stored in an F-code memory
box (polling memory) in the other machine. During the polling operation, your machine must correctly specify the F-code
(sub-address and passcode) configured in the other machine or polling reception will not take place.
• Verify the F-code (sub-address and passcode) of the memory box in the other machine before you perform F-code polling
reception.
• Do not place an original in the automatic document feeder or on the document glass when using this function.
• The receiving machine bears the phone charges of the transmission.
1
Select polling.
(1) Touch the [Job Detail Settings] key.
(2) Touch the [Special Modes] key.
☞ SPECIAL MODES (page 4-60)
(3) Touch the keys to switch through
the screens.
(4) Touch the [Polling] key so that it is
highlight.
(5) Touch the [OK] key.
Transmission
The other machine
F-code polling memory box
Box name: BBBB
Sub-address: AAAAAAAA
Passcode: XXXXXXXX
Sub-address: AAAAAAAA
Passcode: XXXXXXXX
Transmission request (polling)
using an F-code
The machine
Fax
Special Modes
3/3
Memory Box Polling
Transaction
Report
Verif.
Stamp
Own Name
Select
OK
(4) (5) (3)
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
