4-44
FACSIMILE
Contents
JOB DETAIL SETTINGS
When the [Job Detail Settings] key is touched, keys for image settings appear. The [Special Modes] key also appears to
allow the selection of special modes.
The currently configured setting appears at the top of the [Exposure] key, the [Resolution] key and the [Original] key.
(1) [Exposure] key
Touch this key to select the exposure for scanning.
☞ CHANGING THE EXPOSURE (page 4-50)
(2) [Resolution] key
Touch this key to select the scanning resolution.
☞ CHANGING THE RESOLUTION (page 4-51)
(3) [Original] key
Touch this key to set the scan size, send size, and
orientation of the original, and select 2-sided scanning
settings.
☞ AUTOMATICALLY SCANNING BOTH SIDES OF
AN ORIGINAL (2-Sided Original) (page 4-45),
SPECIFYING THE SCAN SIZE AND SEND SIZE
(Enlarge/Reduce) (page 4-46)
(4) [Special Modes] key
Touch this key to use a special mode.
☞ SPECIAL MODES (page 4-60)
To Next Page
Loading...
