7-136
SYSTEM SETTINGS
Contents
This section explains System Settings that are related to fax mode.
System Settings (General) List
When the system settings are accessed with general rights, the following items appear. The factory default settings for
each item are also shown. For items that can only be accessed with administrator rights, see "System Settings for Fax
(Administrator) List" (page 7-153).
Address Control
Fax Data Receive/Forward
* When a finisher is installed.
SYSTEM SETTINGS FOR FAX
Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings.
Item Factory default setting Page
■ Address Control
7-137
● Direct Address/Program – 7-137
● F-Code Memory Box – 7-141
Item Factory default setting Page
■ Fax Data Receive/Forward 7-151
● Fax Receive Settings Auto Reception
7-151
X Multiple Set Print Disable
X Staple Disable
● Fax Data Forward –
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
