7-47
SYSTEM SETTINGS
Contents
Settings
*1 When a right tray is installed.
*2 When a finisher is installed.
*3 This setting is used to adjust the line width of vector graphics (black and white printing only). Except for CAD and
other specialized uses, there is normally no need to change this setting. When "0" is selected, all lines are printed at a
width of 1 dot.
*4 Only effective when printing PDF, JPEG, and TIFF files.
Item Settings
Copies 1 - 999 sets
Orientation • Portrait
• Landscape
Default Paper Size A3, B4, A4, B5, A5, 11" x 17", 8-1/2" x 14",
8-1/2" x 13", 8-1/2" x 11", 7-1/4" x 10-1/2", 5-1/2" x 8-1/2", 8K, 16K
Default Output Tray*
1
• Centre Tray
• Offset Tray*
2
• Right Tray
Default Paper Type Plain Paper, Letter Head, Pre-Printed, Pre-Punched, Recycle Paper, Colour
Initial Resolution Setting • 600dpi
• 600dpi (High Quality)
Disable Blank Page Print • (Disabled)
• (Enabled)
Line Thickness*
3
0 - 9
2-Sided Print • 1-Sided
• 2-Sided (Book)
• 2-Sided (Tablet)
Colour Mode •Auto
•B/W
N-Up Print*
3
•1-Up
•2-Up
•4-Up
Fit To Page*
4
• (Use Fit to Page)
• (Do not use Fit to Page)
Output • Print per Unit
• Punch*
2
• Staple Position*
2
:
None, 1 Staple at Back, 2 Staples, 2 Staples (Top)
Quick File • (Disabled)
• (Enabled)
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
