7-112
SYSTEM SETTINGS
Contents
Settings to Disable Transmission
These settings are used to disable the following
transmission operations.
Disable [Resend] on Fax/Image Send Mode
Disable the use of the [Resend] key on the basic screen
of image send mode.
To enable this setting, select the checkbox and
touch the [OK] key.
Disable Selection from the Address Book
This is used to disable selecting the destination from the
Address Book.
To use this setting, select the checkboxes of the
desired items from the following and touch the [OK] key.
•E-mail
• FTP
•Desktop
• Network Folder
• Internet Fax (Including Direct SMTP)
•Fax
(When the [Select/Cancel All] key is touched, all settings
become . When the key is touched in the checked
condition, all settings become .)
Disable Direct Entry
This prohibits the direct entry of the address.
To use this setting, select the checkboxes of the
desired items from the following and touch the [OK] key.
•E-mail
• Internet Fax (Including Direct SMTP)
•Fax
(When the [Select/Cancel All] key is touched, all settings
become . When the key is touched in the checked
condition, all settings become .)
Disable PC-I-Fax Transmission
(When Internet fax expansion kit is installed.)
Disable transmission from PC-I-Fax.
To enable this setting, select the checkbox and
touch the [OK] key.
Disable PC-Fax Transmission
(When the facsimile expansion kit is installed.)
Disable transmission from PC-Fax.
To enable this setting, select the checkbox and
touch the [OK] key.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
