7-162
SYSTEM SETTINGS
Contents
Fax Output Settings
These settings are used to select the number of copies
and output tray for received faxes. When a finisher is
installed, the output tray and stapling can be selected.
Touch the key of the desired output tray. Open the
number of copies screen with the key.
Enter number of copies to be printed with the numeric
keys and touch the [OK] key.
When a finisher is installed, enter the number of copies
and then touch the keys for the desired staple position
and paper size.
• This setting can only be used when the [Multiple Set
Print] and [Staple] checkbox is selected in the
"Fax Receive Settings" (page 7-151).
• When a finisher is installed, the number of sheets
that can be stapled is 50 for A4 (8-1/2" x 11"), and
B5 (5-1/2" x 8-1/2") sizes and 30 for other sizes.
System Settings
Fax Output Settings
Enter the number of prints via the 10-key pad.
Staple Settings
Prints
1
A4 A4R
B5 or B4
A4 or A3
2/2
OK
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
