Sharp MX-4101N

MX-5001N SENSOR/SWITCH SECTION R – 1
MX-5001N
Service Manual
[R] SENSOR/SWITCH SECTION
1. Disassembly and assembly
A. Sensor/Switch
(1) Main switch
1) Remove the front cabinet.
2) Remove the screw, and remove the frame cover.
3) Remove the screw, and remove the main switch unit.
4) Disconnect the connector, disengage the pawl, and remove
the main switch.
* When installing, be careful of connection of the connector.
(2) Front door open/close switch
1) Remove the frame cover.
2) Remove the screw, and remove the front door open/close
switch unit.
Disconnect the connector and remove the screw, and remove
the front door open/close switch.
Parts
a Main switch
b Front door open/close switch
c Right door open/close switch
a
b
c
1
2
3
2
3
F
R
1
2
3