Note: Excludes Part Change/Correction Information.
Measures to reinforce the mounting sections of Hinge Assy R in ADF frame.
Printer installation under Mac OSX 10.10
Staple Unit & Staple Cartridge listing
Sharp Remote Device Manager [SRDM] v1.5
Rom version upgrade (including revision history)
Registry growth when using an auto created printer under a citrix or
terminal services environment.
Measures to improve the F/R density unevenness
Sharp Remote Device Manager [SRDM] v1.3
Countermeasure for L4-16 trouble due to the malfunction of the pressure
release detect actuator
Tentative measures against contact problem of 7 inch LCD connector
Pressure release detect actuator & plate
F2-64/65/66/67 Trouble code
Rom version upgrade (including revision history)
CPFD1_S or CPFD1_N paper jam, due to the CPFC clutch sliding within the
paper feed drive unit.
Scan to OSX10.7 using FTP
Configuring ID card with internal user control
Rom version upgrade (including revision history)
Measures against lines on copy due to dust contamination on PGM mirrors
within LSU
Sharp Remote Device Manager (SRDM) v1.1
Improvement to the pressure balance of the transfer unit
Contact problems of the drum presence detect spring plate A/B
Sharp Remote Device Manager (SRDM)
Measures against L4-12 error or POD1 paper jam due to transfer CL blade
flip
Countermeasures to prevent the DV shutter cap becoming loose when
removing the DV unit
Durability increase for the upper heat roller bearing.
Rom version upgrade (including revision history)
Breakage of exposed lead wires of the clutch
Caution when removing the DV unit
Change of installation procedure
L4-16 pressure release trouble caused by the breaking of the pressure
release detect actuator
Upgrade of PAU5 (Version 5.4.0)
Countermeasure against abnormal noise from the HDD fan
Precaution when inserting a toner cartridge
To Next Page
Loading...
Need help?
General
