MX-FN27, MX-PN14 OPERATIONAL DESCRIPTION 6 – 14
F. Stack Delivery Operation
(1) Outline
The paper in the processing tray is delivered in stacks using the assist guide and assist claw.
The assist guide supports the trailing edge of the paper stack, and the assist claw pushes out to eject the stack.
The assist guide's home position is detected by the Assist home position sensor (FNPS7).
The assist guide and assist claw are moved to the stack delivery position by the rotating assist motor They are returned to their home positions by the
Assist motor (FNM5) rotating in reverse.
(2) Divided Delivery
Normally in non-sort or shift-sort mode, paper aligned and shifted on the processing tray is divided every five sheets and delivered. If the sixth sheet
is the last sheet, the last sheet is included to create a six-sheet stack and delivered.
The following table shows the number of divided delivery sheets depending on the paper type, paper size, and paper weight.
Paper type Paper size Paper weight Number of divided delivery sheets
OHP, label, postcard, envelope,
transparency
- - 1 sheet
Recycled, pre- punched Paper width: 210.0 mm to 297.0 mm
Paper length: 173.4 mm to 431.8 mm
- 2 sheets
Other than above - 1 sheet
Other than above Paper width: 210.0 mm to 297.0 mm
Paper length: 173.4 mm to 431.8 mm
105g/m2 or less Paper length: 182 mm to 216 mm
Paper width 210 mm to less than 279.4 mm (16K,
EXEC, B5)
2 sheets
Paper length: 355.6 mm (LGL) or more
2 sheets
Other than above: 3 sheets
More than 105g/m2 2 sheets
Other than above - 1 sheet
Assist motor (FNM5)
Assist home position sensor
(FNPS7)
Assist Guide
Assist Claw
Assist Claw
To Next Page
Loading...
