Sharp MX-FN27 - Staple-Free Staple Section; Manual Staple Section; Punch Unit

MX-FN27, MX-PN14 SPECIFICATIONS 1 – 2
4. Staple-free staple section
Stapling position
5. Manual staple section
Stapling position
6. Punch Unit
*1: Manual switching 2/3 holes
*2: Auto switching 2/4 holes
Types of punch hole (Common for each punch unit)
Staple position 1-point at rear (Slant)
Number of sheets to be stitched Max. 5 sheets
Strength: 5 sheets for 64g/m2 and under, 4 sheets for 65 - 81.4g/m2, 3 sheets for 81.5-105g/m2)
Staple position 1-point (Flat)
Number of sheets to be stitched Thickness of paper : 4 mm and under
Approx. 45 sheets for 64 g/m, Approx. 40 sheets for 80 g/m2 )
Supply method of Staple Common use with Staple section
Detection of non staple Common use with Staple section.
MX-PN14B MX-PN14C MX-PN14D
Description 2/3-hole)*1 2/4-hole)*2 4-hole, wide)
Punch Type Any one of the module above can be installed.
Punchable paper size/weight Plain paper (55-105g/m2), Heavy Paper (106-300g/m2) (16 lb. bond-140 lb. index)
Power source Supplied from finisher
Dimensions(WxDxH mm) 105 x 479 x 136 mm
Weight Approx. 2.7kg
Rear 1-point stapling (30 deg)
13.5 +2.0 / -1 mm
3.0 mm or less
7.8 +2.0 / -1 mm
Delivery direction
Stapling position
Manual stapling
5.0 -/+ 2.0 mm
5.0 -/+ 2.0 mm