Sharp MX-FN27 - Page 9

MX-FN27, MX-PN14 SPECIFICATIONS 1 – 5
*1: Custom size of Envelope is available by soft SW. (Default: OFF)
*2: Auto change from 3 holes to 2 holes
*3: Heavy paper mode (First page + Last page (total 2pages) + Normal paper only available)
*4: Heavy paper mode (First page + Normal paper only available)
Staple capacity : 209g/m2(cover)x1-sheet + 80g/m2x14-sheet, 209g/m2(cover)x1-sheet + 90g/m2 x 9-sheet
*5: A4 or 8.5x11 only
*6: Correspond to paper type setting
*7: not guaranteed over 129g/m2
*8: 90g/m2 or less
*9: 80g/m2
*10: be not covered under warranty thought movement is allowed.
*11: not guarantee the guaranty of 25 mm and under gap.
*12: Nearly 58g/m2 .
P
a
p
e
r
s
i
z
e
Custom- size unknown Yes*11 - - - - - - -
Long paper
Width:
90 -
320mm
Length:
458 -
1300mm
Yes*11 - - - - - - -
Inner Finisher Punch module
Ejectable
paper
Offset Number of
sheets to be
stitched
Staple less
Staple
2 holes 2/3 holes 2/4 holes 4 holes
wide