MX-M350/M450 N/U SIMULATION 9 - 21
Operation/Procedure
The key operator code is displayed.
Operation/Procedure
The values of the finisher counter, the scanner (read), counter, and
the SPF related counters are displayed.
Operation/Procedure
The values of the paper feed related counters are displayed.
Operation/Procedure
The system configuration is displayed. (The model names of the
installed devices and options are displayed.)
(Model code list)
22-7
Purpose Adjustment/Setup/Operation data output/Check
(Display/Print)
Function
(Purpose)
Used to display the key operator code. (This
simulation is used when the customer forgets the
key operator code.)
Item Data User data
22-8
Purpose Adjustment/Setup/Operation data output/Check
(Display/Print)
Function
(Purpose)
Used to check the number of use of the finisher,
the SPF, and the scan (reading) unit.
Section Optical (Image scanning) Finisher
Item Counter
SPF Document feed quantity
SCAN Number of scans
STAPLER Number of stapling
PUNCH Number of punching
STAMP Number of SPF finish stamps
22-9
Purpose Adjustment/Setup/Operation data output/Check
(Display/Print)
Function
(Purpose)
Used to check the number of use (print quantity) of
each paper feed section.
Section Paper feed, ADU
Item Counter
TRAY1 Use quantity of tray 1
TRAY2 Use quantity of tray 2 (Multi purpose tray)
TRAY3/LCC1 Use quantity of tray 3/LCC left tray
(Common to Desk/LCC)
TRAY4/LCC2 Use quantity of tray 4/LCC right tray
BPT Use quantity of manual feed tray
ADU Use quantity of duplex paper feed
SIMULATION 22-7
KEY OPERATOR CODE DISPLAY.
CODE: *****
SIMULATION 22-8
ORG./STAPLE COUNTER DATA DISPLAY.
SPF: ********
SCAN: ********
STAPLER: ******** PUNCH: ********
STAMP: ********
SIMULATION 22-9
PAPER FEED COUNTER DATA DISPLAY.
TRAY1: ******** TRAY2: ********
TRAY3/LCC1:******** TRAY4/LCC2:********
BPT: ******** ADU: ********
22-10
Purpose Adjustment/Setup/Operation data output/Check
(Display/Print)
Function
(Purpose)
Used to check the system configuration (option,
internal hardware).
Item Specifications Options
MACHINE MX-M350U, MX-M450U/
MX-M350N, MX-M450N
SPF (Model code)
FINISHER NONE/ (Model code)
MAIL BIN NONE/ (Model code)
PUNCH NONE/ (Model code)
DESK/LCC NONE/ (Model code)
ADU NONE/ (Model code)
SYSTEM MEMORY Memory capacity (MB)
HDD Hard disk capacity (MB)
ICU Board type
NIC NONE/ (Model code)
NSCN NONE/ (Network scanner)
PS3 NONE/ (PS3 expansion kit)
FAX NONE/ (Model code)
FAX MEMORY FAX expansion memory capacity (MB)
HAND SET NONE/ (Model code)
STAMP Finisher stamp NONE/ (Model code)
PCU TYPE PCU PWB type (JPN: Japan/
EX100: EX Japan 100V/
EX200: EX Japan 200V)
Item Display Content
MACHINE MX-M350U 35-sheet U model (Local printer
standard provision model)
MX-M450U 45-sheet U model (Local printer
standard provision model)
MX-M350N 35-sheet N model
MX-M450N 45-sheet N model
SPF ---- Document feed unit not installed
MX-EFX1 Duplex document feed unit
(DSPF) installed
FINISHER ---- After-work unit not installed
AR-FN6 Built-in finisher installed
AR-FN7 Console finisher installed
MAIL BIN ---- Mail bin not installed
AR-MS1 Mail bin installed
Punch unit ---- Punch unit not installed
AR-PN1A Punch unit 2 holes
AR-PN1B Punch unit 3 holes
AR-PN1C Punch unit 4 holes
AR-PN1D Punch unit 4 holes wide hole
ADU ---- Duplex module not installed
AR-DU3 Duplex module installed
AR-DU4 Duplex module + manual feed unit
installed
DESK ---- Paper feed desk not installed
AR-MU2 Multi-purpose tray installed
AR-D27 Paper feed desk installed
AR-D28 Tandem desk installed
ICU TYPE-U/S For U/S model board
TYPE-U/FP For U/FP model board
TYPE-N For N model board
MEMORY 0MB No expansion memory
***MB Expansion memory ***MB
To Next Page
Loading...
