Sharp MX-M350 - Page 166

MX-M350/M450 N/U SIMULATION 9 - 27
Operation/Procedure
1) Select the counter to be cleared with 10-key.
2) Press [START] key.
The confirmation to clear is opened.
3) Select Yes/NO of counter clear with 10-key.
YES: Clear
NO: Not clear
4) Press [START] key.
* = DRUM ROTATION, DV ROTATION
Operation/Procedure
1) Select the counter to be cleared with 10-key.
2) Press [START] key.
The confirmation to clear is opened.
3) Select Yes/NO of counter clear with 10-key.
YES: Clear
NO: Not clear
4) Press [START] key.
* = NETWORK SCANNER ORIGINAL, MAIL, FTP, INTERNET-
FAX ORIGINAL COUNTER, INTERNET-FAX SEND,
INTERNET-FAX RECEIVE, INTERNET-FAX OUTPUT, SCAN
TO HDD, INTERNET-FAX SEND IMAGES, MAIL SEND
IMAGES, FTP SEND IMAGES, DOC FILING OUTPUT
Operation/Procedure
Press [START] key.
The developing motor and the OPC drum motor rotate, and the
toner concentration detection level and the humidity sensor detec-
tion level and the temperature sensor detection level are dis-
played.
24-11
Purpose Data clear
Function
(Purpose)
Used to reset the OPC drum rotation time, and the
DV unit rotation time counter. The developer
counter in the DV unit installed is reset.
Section Image process (Photoconductor/Developing/
Transfer/Cleaning)
Item Counter Developer
1 DRUM ROTATION OPC drum rotation time
2 DV ROTATION DV unit rotation time
Press [START] key. Press [SYSTEM SETTINGS] key or [START] key.
24-15
Purpose Data clear
Function
(Purpose)
Used to clear the counters related to the scan
mode and the Internet FAX mode.
Item Counter
1 NETWORK SCANNER
ORIGINAL COUNTER
Document scan quantity
counter in the network scanner
mode
2 MAIL COUNTER Number of times of mail send
3 FTP COUNTER Number of times of FTP send
4 INTERNET-FAX ORIGINAL
COUNTER
Internet FAX document scan
quantity (Total quantity of OC
and SPF)
5 INTERNET-FAX SEND Number of times of Internet
FAX send
6 INTERNET-FAX RECEIVE Number of times of Internet
FAX receive
7 INTERNET-FAX OUTPUT Internet FAX print quantity
8 SCAN TO HDD SCAN TO HDD record quantity
9 INTERNET-FAX SEND
IMAGES
Internet FAX send quantity
counter
SIMULATION 24-11
TIMER DATA CLEAR. SELECT1-2, AND PRESS START.
1. DRUM ROTATION
2. DV ROTATION
1
SIMULATION 24-11
* TIMER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
1
10 MAIL SEND IMAGES MAIL send quantity counter
11 FTP SEND IMAGES FTP send quantity counter
12 DOC FILING OUTPUT Document filing print counter.
Press [START] key. Press [SYSTEM SETTINGS] key or [START] key.
25
25-1
Purpose Operation test/Check
Function
(Purpose)
Used to check the operations of the developing
section (toner concentration, humidity and toner
concentration sensor, humidity sensor,
temperature sensor output can be monitored.)
Section Process (Developing section)
Item Operation
Press [START] key. Press [SYSTEM SETTINGS] key, and the
operation is stopped immediately or after 2 min.
SIMULATION 24-15
NETWORK SCANNER AND INTERNET-FAX COUNTER CLEAR.
SELECT1-3, AND PRESS START.
1. NETWORK SCANNER ORIGINAL COUNTER
2. MAIL COUNTER
3. FTP COUNTER
4. INTERNET-FAX ORIGINAL COUNTER: ********
5. INTERNET-FAX SEND: ********
6. INTERNET-FAX RECEIVE: ********
7. INTERNET-FAX OUTPUT: ********
8. SCAN TO HDD: ********
9. INTERNET-FAX SEND IMAGES: ********
10. MAIL SEND IMAGES: ********
11. FTP SEND IMAGES: ********
12. DOC FILING OUTPUT: ********
1
SIMULATION 24-15
* COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
1
SIMULATION 25-1
TONER SENSOR OUTPUT MONITOR. PRESS START.
HUMIDITY AREA : 70.0 - 72.5
TEMPERATURE AREA: 70.0 - 72.5
DEVE REFERENCE : 128
SIMULATION 25-1
DV MONITOR. EXECUTING···.
HUMIDITY AREA : 70.0 - 72.5
TEMPERATURE AREA: 70.0 - 72.5
DEVE REFERENCE : 128