MX-M503N MX-AMX1 24 – 1
MX-M503N
Service Manual
[24] MX-AMX1
* This option requires installation of a HDD, and cannot be
used with the models having no HDD.
When this option is used with the U model, the MX-PB11 and
the MX-NSX1 options must be installed.
1. Unpacking
A. Check the packed items
2. Installation
<Note before installation>
To enable the Application Integration Module function, the product
key must be acquired.
A. Make preparations to enable the Application
Integration Module function.
1) To enable the Application Integration Module function, enter
the product key by the key operation of the operation panel.
a) Press the system setting key on the operation panel.
b) Select page 2/2 of the system setting, and touch [Product
key input] key.
c) Touch the input column.
d) Enter the product key with numeric key (10-key), and
touch [Registration] key.
2) After entering the product key information, turn OFF the power
switch and the main power switch of the machine, and turn
them ON again. (For the models with the main power switch
only, turn OFF/ON the main power switch only.)
B. Check the operation of the Application
Integration Module function.
1) Send image data and meta data by referring to MX-AMX1
GETTING STARTED GUIDE (included in package). Check to
confirm that image data and meta data are properly received.
No. Packed part names Quantity
1 CD-ROM 2
2 MX-AMX1 GETTING STARTED GUIDE 1
3 Sharpdesk license kit Operation Manual 1
To Next Page
Loading...
Need help?
General
