Sharp Notevision PG-B10S User Manual

-17
Basic Operation
Select the “INPUT 1” using the INPUT button on the projector or the INPUT 1 button on the remote control.
••
••
• When pressing on the projector, input mode switches in order of
INPUT 1 INPUT 2 INPUT 3
.
••
••
• When using the remote control, press
//
to switch the INPUT mode.
On the remote
control
On the
projector
4. Adjust the projected image
33
33
3 Correct trapezoidal distortion
5. Select the INPUT mode
On-screen display (RGB)
Correcting trapezoidal distortion using the Keystone Correction.
Compresses
upper side.
On the remote
control
On the projector
Compresses
lower side.
Page 20
On-screen display (Component)
Page 19
11
11
1 Bring the projected image into focus and adjust the projected image size
Page 22
Page 22
22
22
2 Adjust the projected image position and the projector angle
Page 23
Page 25
Focus
••
••
• Bring the projected
image into focus
using the focus ring.
Zoom
••
••
• Adjust the
projected
image size
using the
zoom knob.
Projection position
••
••
• Adjust the
projected
image position
using the lens
shift lever.
Angle
••
••
• Adjust the
projector
angle using
the HEIGHT
ADJUST
button.
zoom in
zoom out

Sharp Notevision PG-B10S Specifications

General

Brand	Sharp
Model	Notevision PG-B10S
Category	Projector
Language	English