Sharp Notevision PG-B10S User Manual

-40
Signal Info (Checking the
Input Signal)
Select “Signal Info” on the “Fine Sync” menu
to check the current input signal informa-
tion.
Checking the menu screen Page 34
Example: “Fine Sync” menu screen for
INPUT 1 mode
Note
• The projector will display the number of
scanned lines available from audio-visual
equipment such as a DVD player or Digital
Video.
Auto Sync (Auto Sync Adjust-
ment)
Used to automatically adjust a computer image.
Select “Auto Sync” on the “Fine Sync” menu
and set it to “ ”(ON) or “ ”(OFF).
Setting the menu screen Page 34
Example: “Fine Sync” menu screen for
INPUT 1 mode
Description of Auto Sync Adjustment
Note
• Auto Sync adjustment is also performed by
pressing on the projector or
on the remote control.
• The Auto Sync adjustment may take some time
to complete, depending on the image of the
computer connected to the projector.
• When the optimum image cannot be achieved
with Auto Sync adjustment, use manual adjust-
ments. (See page 39.)
Computer Image Adjustment
Selectable Settings Description
Auto Sync adjustment will occur when
the projector is turned on or when the
input signals are switched, when
connected to a computer.
Auto Sync adjustment is not automati-
cally performed.
ON
OFF

Sharp Notevision PG-B10S Specifications

General

Brand	Sharp
Model	Notevision PG-B10S
Category	Projector
Language	English