-28
×1 ×4 ×9 ×16 ×36 ×64×2 ×3
You can instantly freeze a moving image and enlarge a specific portion of an image with the remote
control. Using these functions, you can explain the image to the audience more effectively.
Freeze and Enlarge Image
Freezing a Moving
Image
1 Press .
• The projected image is frozen.
2 Press again to return to the
moving image from the currently
connected device.
Displaying an Enlarged
Portion of an Image
1 Press .
• Pressing or enlarges or reduces
the projected image.
• You can change the location of the en-
larged image using ', ", \ and |.
2 Press to cancel the operation.
• The magnification then returns to ×1.
In the following cases, the image will re-
turn to the normal size (×1).
• When switching the INPUT mode.
• When
has been pressed.
• When the input signal is changed.
• When the input signal resolution and re-
fresh rate (vertical frequency) change.
UNDO button
', ", \, |
buttons
ENLARGE
(Reduce/Enlarge)
buttons
FREEZE button
To Next Page
Loading...
Need help?
General