Sharp Notevision PG-B10S User Manual

-62
4 Remove the air filter.
• Pick the air filter up with your fingers and
lift it out of the filter cover.
5 Clean the air filter.
• Clean the dust off the air filter and cover
with a vacuum cleaner extension hose.
6 Replace the air filter.
• Place the air filter underneath the tabs
on the filter cover.
7 Replace the filter cover.
• Align the tab on the filter cover and place
it while pressing the tab to close it (1).
Then tighten the user service screw (2)
to secure the filter cover.
1
2
Tab
User service screw
Replacing the Air Filter
Note
• Be sure the filter cover is securely installed.
The power will not turn on unless it is
correctly installed.
• If dust or dirt has collected inside the rear
and bottom air filters (not removable), clean
the filter with a vacuum cleaner extension
hose.

Sharp Notevision PG-B10S Specifications

General

Brand	Sharp
Model	Notevision PG-B10S
Category	Projector
Language	English