Sharp PG-C30XU User Manual

22
PG-C30XU
Convergence and Focus Adjustments at a Glance
Adjustment directions
X direction LCD right and left
Convergence Y direction LCD top and bottom
θZ direction Rotation around Z axis LCD turning axis
Z direction LCD optical axis
Focus θX direction Rotation around X axis LCD top-to-bottom flapping
θY direction Rotation around Y axis LCD right-to-left flapping
Adjustment Direction Definition Direction of LCD panel
Convergence and Focus Adjustment for the Optical Mechanism
X direction ±0.8mm Eccentric cam Eccentric cam adjusting wrench d Hex wrench
Convergence Y direction ±0.8mm Eccentric cam Eccentric cam adjusting wrench d Hex wrench
R/B θZ direction ±1° Eccentric cam Eccentric cam adjusting wrench d Hex wrench
colors Z direction ±0.8mm Notch and hole "a" & "c" Eccentric screwdriver, a, c
Focus θX direction ±1° Notch and hole "a" & "c" Bladed screwdriver a, c
θY direction ±1°
Notch and hole "b" & "c" b, c
Z direction ±0.2mm
G color Focus θX direction ±1° Same as for R and B colors
θY direction ±1°
Color Adjustment Direction
Movement Position Adjusting tool Lock screw Tightening tool
Phillips
screwdriver,
*Hex wrench
Focus Adjustments the Other Way
a Notch and hole "a" Z and θX directions
b Notch and hole "b" θY direction
c Notch and hole "c" Z, θX and θY directions
Lock screw Position Related direction
Convergence and Focus Adjusting and Tightening Tools
Tool Specific or General Tool code Configuration
1.27mm, preferably use a 70 mm or
longer screwdriver (with a handle).
Phillips screwdriver General — For M2.6 pan-head machine screw
Bladed screwdriver General 9EQDRiVER-NV1B
9EQLNC-XGNV4U
9EQLNC-XGNV1U
Hex wrench General (redesigned)
Eccentric screwdriver Specific 9DADRiVER-NV4U
*Hex wrench General —
80
100
2
5
16
R2
50
CUT
2
2
92
5
7.5
0.5
min85
ø5
ø3.5
3.5
Eccentric cam
Specific 9DASPN-XGNV1U
adjusting wrench

Sharp PG-C30XU Specifications

General

Brand	Sharp
Model	PG-C30XU
Category	Projector
Language	English