PN-K321/K322B SERVICE MENU/VARIOUS SETTING TOOL OPERATING PROCEDURES 4 - 10
Reput USB Flash Drive or there is OFF-ON of power supply,
and carry out again.
7 ) Even if it carries out repetition implementation, when you fail,
exchange USB Flash Drive
■USER SETTING VALUE RESTORE
1) If cursor is united with [RESTORE] of the following menu and
press [ENTER] button,
2) The list of the files saved at the USB Flash Drive is displayed.
If select the file name to restore and press [ENTER], restoration
will begin. Don't extract a USB Flash Drive during writing.
3) After completion of restoring, the information display is reset
■ERROR MESSAGE
- Could not save. Drive has no free memory.
There is only no availability which saves a log at USB Flash Drive
- USB not recognized. Check the connection.
USB cannot be recognized (mount failure)
- Failed to save file.
The format of USB Flash Drive is outside correspondence
The file name which it tries to write in overlaps
Writing is not made by write-protection etc.
Abnormalities occur at the time of other writing
- Cannot find file
When a file does not find one
- Restoring has failed.
When the data of a file which it tried to read is inaccurate and it is
or file reading failure
- Restoring has failed. System will be restarted
When it fails in the middle of restoration processing
To Next Page
Loading...
