Sharp SF-2022 - Page 10

taded Adoo Bulpeo7 co Wanouuaave |
~ LOADING COPY PAPER
The (J) indicator will light when there is no
copy paper in a selected paper feed station, or
when a selected paper drawer is not installed
or is improperly installed.
For best results, use only Sharp recommended
paper.
The copy paper size for the 500-sheet paper
drawer and the optional stand/500-sheet or
1000-sheet paper drawer will be set by Sharp
service personnel according to your request
when you purchase the Copier. If a different
paper size setting is required, contact your
authorised Sharp Service Centre.
The 500-sheet paper drawer is available for
four different paper sizes: Ad, A4R, B4 and A3
(8-1/2" x 11", 8-1/2" x 11"R 8-1/2" x 14" and 11°
x17").
The 1000-sheet paper drawer is available for
three different paper sizes: A4, A4R, and B4
(8-1/2" x 11", 8-1/2" x 11"R and 8-1/2" x 14"),
The paper size for the lower paper drawer can
be changed by the user.
I
2
3
Gently lift and draw out the paper drawer. If there is
paper in the drawer, push the drawer firmly back into
the copier.
If the drawer is empty, fan the copy paper and insert
it into the drawer.
® The drawer holds 500 sheets of paper.
Do not load paper above the maximum height line.
Push the paper drawer firmly back into the copier.