Sharp SF-2022 - Page 11

LOADING COPY PAPER
The lower paper drawer can accommodaie five different paper
sizes. To change the paper size, simply change the inner
cassette. (The inner cassettes are optional.)
1 Gently lift and draw out the lower paper drawer.
Grasp the inner cassette tabs and remove the
cassette.
Remove the cover of the inner cassette to be
installed. If the cassette is empty, fan the copy paper
and place it in the cassette.
® The cassette holds 500 sheets of paper.
(For Ad or 8-1/2" x 5-1/2" sized paper, the maximum is 250
sheets.)
Do not load paper above the maximum height line.
Place the cover on the inner cassette which was removed.
f Place the inner cassette into the drawer.
@ Position the inner cassette so its four protrusions fit into the
holes of the paper drawer.
e Inner cassettes are available for five different paper sizes:
A5, A4, A4R, B4 and AS (8-1/2" x 5-1/2", 8-1/2" x 11", 8-1/2"
x 11"R, 8-1/2" x 14", and 11" x 17°).
Place the paper size plate in front of the paper drawer
to match the paper size set.
Yfamepe
Push the lower paper drawer firmly back into the
Copier.
Paper size plate
igdistaneal |
SE
i
jaded Adoo Buipeo? [_]