[6] DISASSEMBLY AND ASSEMBLY
The descriptions of this chapter are divided into the following sec-
tions:
1. Paper feed section, paper transport section, power section
2. Manual paper feed section
3. Fuser section
4. Optical system
5. SPF section
6. Drum section
7. Developer section
8. Operation panel/medium cabinet
9. Major parts in the frame side
1.Paper feed section, paper transport
section, power section
1-1. Paper feed unit
1 Open the front cover and open the body. Release the right and
the left lock levers and pull out the manual paper feed unit.
2 Disconnect the CN-B connector of the lower PWB, remove the
paper feed unit fixing screws (4 pcs.), and lift the paper feed unit
to remove.
1-2. Paper feed roller ass’y removal
1 Disconnect the connector of the magnetic clutch in the rear frame
side.
2 Remove the hook section of the paper feed roller bearing in the
front frame side by using a screwdriver.
3 Remove the roller release arm spring from the paper feed frame.
1
2
3
4
6 – 1
To Next Page
Loading...
Need help?
General
