142
■ PLU range
You can program PLUs by range as follows:
Procedure
▼
Enter a value or select an option for each item as follows:
• START (Use the numeric entry)
Starting PLU code (max. 6 digits)
• END (Use the numeric entry)
Ending PLU code (max. 6 digits)
• OPERATION (Use the selective entry)
MAINTENANCE: Enables you to change the setting
you have programmed.
NEW&MAINTENANCE: Enables you to change the current
setting when the specified codes
have already been created or to
create new codes when the
specified codes have not been
created yet.
DEL: Enables you to delete a specified
range of PLUs.
The screen continues in the same
format as screens shown in section
“■ PLU.”
To Next Page
Loading...
