178
Personnel Programming
Use the following procedure to select any option included in the personnel group:
1.
In the SETTING window, select “7 PERSONNEL.”
• The PERSONNEL window will appear.
2.
Select any option from the following options list:
1 CLERK: Clerk
2 MANAGER: Manager
3 EMPLOYEE: Employee
4 JOB LOCATE TBL: Job location table
The following illustration shows those options included in the personnel programming group.
7 PERSONNEL 1 CLERK ➡ See “■ Clerk” on page 179.
2 MANAGER ➡ See “■ Manager” on page 181.
3 EMPLOYEE ➡ See “■ Employee” on page 182.
4 JOB LOCATE TBL ➡ See “■ Job location table” on page 183.
Procedure
▼
To Next Page
