186
Optional Feature Selection
Use the following procedure to select any option included in the optional group:
1.
In the SETTING window, select “10 OPTIONAL.”
• The OPTIONAL window will appear.
2.
Select any option from the following options list:
1 FUNC.PROHIBIT.: Function prohibition
2 FUNC.SELECTING: Function selection
3 PRINTING SELECT: Printing selection
Procedure
▼
The following illustration shows those options included in the optional feature programming group.
10 OPTIONAL 1 FUNC.PROHIBIT. ➡ See “■ Function prohibition” on page 187.
2 FUNC.SELECTING ➡ See “■ Function selection” on page 188.
3 PRINTING SELECT ➡ See “■ Printing selection” on page 190.
To Next Page
Loading...
