203
Function Key Programming
Use the following procedure to program a text (key label) or a color for the function key:
1.
In the SETTING window, select “13 FUNCTION KEY.”
• The FUNCTION KEY window will appear.
2.
Select any function key from the key list.
3.
Program a text or a color for the corresponding function key.
• KEY TEXT (Use the character entry)
Enter a text for the function key.
The terminal is provided with various text-length in
compliance with each key size. (max. 16 characters)
• KEY COLOR (Use the selective entry)
Select a key color from the colors list (16 different of
colors).
BLACK/BLUE/LIGHT BLUE/MAGENTA/LIGHT
MAGENTA/GREEN/LIGHT GREEN/RED/LIGHT RED/
CYAN/LIGHT CYAN/GRAY/LIGHT GRAY/YELLOW/
BROWN/WHITE
Procedure
▼
▼
To Next Page
Loading...
