193
Report Programming
Use the following procedure to select any option included in the report group:
1.
In the SETTING window, select “11 REPORT.”
• The REPORT window will appear.
2.
Select any option from the following options list:
1 0 SKIP: Zero skip
2 GNR RPT FORMAT: General report format
3 HOURLY RPT: Hourly report
4 STACKED RPT: Stacked report
The following illustration shows those options included in the report programming group.
11 REPORT 1 0 SKIP ➡ See “■ Zero skip” on page 194.
2 GNR RPT FORMAT ➡ See “■ General report format” on page 195.
3 HOURLY RPT ➡ See “■ Hourly report” on page 195.
4 STACKED RPT ➡ See “■ Stacked report” on page 196.
Procedure
▼
To Next Page
