Sharp UP-3300

200
Procedure
Procedure
Select a pertinent text number from
the free texts list.
▼
■ Receipt logo
Your POS terminal can print programmed messages for customers on every receipt.
Program the item as follows:
• RECEIPT LOGO (Use the character entry)
Logo text for the receipt (max. 40 characters x 6 lines)
Entering sequential characters “=” will print the
corresponding clerk name in the footer logo message. Enter
four to eight characters “=.”
NOTE
The programmable number of lines for a message varies
according to the following message types:
• 3-line header message type
• Graphical logo only type
• Graphical logo and 3-line footer message type
• 6-line header message type
• 3-line header and 3-line footer messages type
• 3-line header message, graphical logo, and 3-line footer
message type
• Graphical logo and 3-line header and 3-line footer
messages type
Please contact your authorized SHARP dealer.
■ Free text
Your POS terminal can print programmed texts for departments and PLUs on every receipt.
Program the item as follows:
• FREE TEXT (Use the character entry)
Free texts for departments and PLUs (max. 99 texts/30
characters per text)