Sharp UP-3300

167
■ Credit key (
CR1
through
CR8
)
Program each item as follows:
• TEXT (Use the character entry)
Description for the credit key. Up to 12 characters can be
entered.
• HALO (High Amount Lockout) (Use the numeric entry)
AB is the same as A x 10
B
.
A: Significant digit (1 through 9)
B: Number of zeros to follow the significant digit
(0 through 8)
You can set AB at 18 for no limitation.
• EFT FUNCTION (Use the selective entry)
COMPULSORY: Makes EFT function compulsory.
NON-COMPULSORY: Makes EFT function non-
compulsory.
• BILL PRINT (Use the selective entry)
COMPULSORY: Compulsory bill printing
NON-COMPULSORY: Non-compulsory bill printing
• FOOTER PRINT (Use the selective entry)
This item decides whether or not your POS terminal should
print a message at the foot of a receipt when a specified
credit key is used.
YES: Enables footer printing on the receipt.
NO: Disables footer printing on the receipt.
• NON-ADD # ENTRY (Use the selective entry)
COMPULSORY: Compulsory non-add code entry
NON-COMPULSORY: Non-compulsory non-add code entry
• CHANGE DUE (Use the selective entry)
DISABLE: Disables change calculation.
ENABLE: Enables change calculation.
• VP (Use the selective entry)
COMPULSORY: Compulsory validation printing
NON-COMPULSORY: Non-compulsory validation printing
• DRAWER OPENING (Use the selective entry)
YES: Opens the drawer.
NO: Disables the drawer opening.
• AMOUNT ENTRY (Use the selective entry)
COMPULSORY: Makes amount tendered entry
compulsory.
INHIBIT: Inhibits amount tendered entry.
Procedure
Select a pertinent credit key from the
credit keys list.
▼