Caller ID
98
2
Press 1 to enter a number, or 2 to clear
a number. (If you pressed 2, go to
Step 4.)
3
Enter the phone number, including the
area code, by pressing the number
keys (max. of 20 digits).
1 2
or
SET CLEAR
32 2 4 5 6
7
4 2 5
4
Press the START/MEMORY key
and then the STOP key.
Blocking voice calls
With Caller ID turned on, you can use the Anti Junk Fax function
described in Blocking Reception of Unwanted Faxes in this chapter to
block voice calls as well as fax receptions (the Anti Junk Fax function
normally only blocks faxes).
In this case, when a voice call or a fax transmission comes in from a
number you have specified as a "Junk Number", your fax will break
the connection as soon as it receives the calling phone number from
the caller ID service (before the second ring).
To use this function, turn on the Anti Junk function and then enter the
number in the Anti Junk Number List as explained in Blocking
Reception of Unwanted Faxes in this chapter (see page 108).
Note: This function cannot be used if you are using the Distinctive Ring
function.
(Example)
START/MEMORY
STOP
all.book Page 98 Wednesday, April 26, 2000 7:08 PM
To Next Page
Loading...
Need help?
General
