Sending Documents From Memory
110
Sending Documents From Memory
With this function, the original document is scanned immediately,
stored in memory, and then transmitted once the connection to the
receiving machine is made. This is convenient when transmitting to
places where the line is often busy, as it saves you from waiting to
pick up the original document and frees the feeder for other
operations. After transmission, the document will be cleared from
memory.
♦ Only one memory transmission can be set at a time.
♦ The amount of memory currently occupied appears as a percentage
in the display while the document is being scanned.
1
Load the document(s).
The display will show:
• Set the resolution and/or contrast if
desired.
2
Press the START/MEMORY key
and then 1.
The display will show:
READY TO SEND
RESOLUTION
ENTER STATION #
1
START/MEMORY
all.book Page 110 Wednesday, April 26, 2000 7:08 PM
To Next Page
Loading...
Need help?
General
