Substitute Reception to Memory
80
4
Press the STOP key to return to the
date and time display.
Substitute Reception to Memory
In situations where printing is not possible, such as when your fax
runs out of paper, the imaging film needs replacement, or the paper
jams, incoming faxes will be received to memory.
When you have received a document in memory, FAX RX IN
MEMORY will appear in the display, alternating with OUT OF
PAPER, FILM END, or PAPER JAM. When you add paper, replace
the imaging film, or clear the jam, the stored documents will
automatically print out.
♦ If you received documents in memory because the fax ran out of
paper, be sure to add paper which is the same size as the paper
previously used. If not, the document print-out size may not match
the size of the printing paper.
Caution!
♦ When documents are stored in memory, do not turn the power off.
This will erase all of the contents.
♦ If documents received in memory are lost due to a power failure or
other interruption in the power supply, a CLEAR REPORT will be
printed out when the power is restored. This gives information
about the receptions lost, including the fax numbers of the
transmitting machines if they are available.
STOP
3
If you selected AUTO, select the
reception ratio to be used in the event
that the memory becomes full
(automatic reduction is not possible
when the memory is full). Press 1 for
93% or 2 for 100%.
1
or
93% 100%
2
all.book Page 80 Wednesday, April 26, 2000 7:08 PM
To Next Page
Loading...
Need help?
General
