Sending a Fax by Automatic Dialing
61
3. Sending
Documents
Storing fax and telephone numbers for Automatic Dialing
1
Press these keys:
The display will alternately show:
2
Press the 1 key to select SET.
The display will alternately show:
3
Enter a two-digit Speed Dial number
by pressing the number keys (01 to
07 for Rapid Key Dialing, 08 to 47
for Speed Dialing).
4
Enter the fax or voice number by
pressing the number keys.
(Note: A space cannot be entered.)
• To clear a mistake, press the
SPEED DIAL key.
♦ If a pause is required between any of the digits to access a special
service or an outside line, press the REDIAL key (two seconds per
pause). The pause will appear as a hyphen. Several pauses can be
entered in a row.
3
FAX/TEL # MODE
1=SET,2=CLEAR
1
FAX/TEL # SET
ENTER SPEED #
0 1
(Example)
(Example)
32 2 4 5 6
7
FUNCTION
all.book Page 61 Wednesday, April 26, 2000 7:08 PM
To Next Page
Loading...
