Sending a Fax by Automatic Dialing
66
Speed Dialing
Speed Dialing can be used to dial any number that has been stored for
Automatic Dialing.
1
Load the document(s).
The display will show:
2
Press the SPEED DIAL key and then
enter the Speed Dial number by
pressing the numeric keys.
• To enter numbers 1 through 9, first
enter 0 and then the number.
(Example)
READY TO SEND
• Set the resolution and/or contrast if
desired.
3
Check the display. If the name or
number shown is correct, press the
START/MEMORY key. (If not,
press the STOP key and then repeat
Step 2.)
SPEED
DIAL
0 9
START/MEMORY
RESOLUTION
all.book Page 66 Wednesday, April 26, 2000 7:08 PM
To Next Page
Loading...
