Sending a Fax by Automatic Dialing
71
3. Sending
Documents
Error Correction Mode
The fax machine is set to automatically correct any distortions in a
transmission due to noise on the telephone line before printing at the
receiving end. This function is called Error Correction Mode (ECM).
ECM is effective for both transmissions and receptions, and is only
effective when the other fax machine has ECM as well.
If desired, you can turn ECM off. This will increase slightly the
amount of memory available for memory transmission and reception.
1
Press these keys:
The display will show:
ECM MODE
2
Press 1 to turn on ECM or 2 to turn it
off.
3
Press the STOP key to return to the
date and time display.
4
FUNCTION
1 2
or
YES NO
STOP
all.book Page 71 Wednesday, April 26, 2000 7:08 PM
To Next Page
Loading...
Need help?
General
