Using TEL Mode
76
3
If the fax doesn't respond, or if the
other party first talks to you and then
wants to send a fax, press 5, *, and *
on the extension phone (only on a
tone dial phone). This signals the fax
to begin reception. Hang up.
Comments:
♦ Your fax will not accept the signal to begin reception (5**) if a
document is loaded in its feeder.
♦ If you have set the Fax Signal Receive setting to NO, press 5, *,
and * on the extension phone to begin reception.
5
Changing the number for remote fax activation
If desired, you can use a number other than 5 to activate fax reception
from an extension telephone. You can select any number from 0 to 9.
1
Press these keys:
The display will show:
4
TEL/FAX REMOTE #
2
Press a number from 0 to 9 .
1
(Example)
FUNCTION
all.book Page 76 Wednesday, April 26, 2000 7:08 PM
To Next Page
Loading...
